Reference Guide

S-Series Stacking Commands | 1407
Parameters
Defaults
No configuration or default values
Command Modes
EXEC
Command
History
Usage
Information
To reboot using the new image, use the command upgrade boot system stack-unit.
Related
Commands
boot
Enter this keyword to copy the boot image from the management unit to the
designated stack members.
system
Enter this keyword to copy the FTOS image from the management unit to the
designated stack members.
all
Enter this keyword to copy the designated image to all stack members.
0-11
Enter the unit ID of the stack member to which to copy the designated image.
A
Enter this keyword to upgrade all stacked units in System A(S4810 only)
B
Enter this keyword to upgrade all stacked units in System B(S4810 only)
Version 7.7.1.0 Introduced on S-Series
reload Reboot FTOS.
reset stack-unit Reset the designated S-Series stack member.
show system (S-Series and
S4810)
Display the current status of all stack members or a specific
member.
show version Display the current FTOS version information on the system.
upgrade (S-Series
management unit and
Z9000)
Upgrade the bootflash image or system image of the S-Series
management unit.