Reference Guide

S-Series Stacking Commands | 1401
Command
History
Usage
Information
Resetting the management unit is not allowed, and an error message will be displayed if you
try to do so. Resetting is a soft reboot, including flushing the forwarding tables.
Starting with FTOS 7.8.1.0, you can run this command directly on the stack standby unit
(standby master) to reset the standby. You cannot reset any other unit from the standby unit.
Example
Stack MAC : 00:01:e8:8b:1a:36
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
----------------------------------------------------------------------------
0 Management online S4810 S4810 8-3-12-1 64
1 Standby online S4810 S4810 8-3-12-1 64
2 Member online S4810 S4810 8-3-12-1 64
3 Member online S4810 S4810 8-3-12-1 64
4 Member online S4810 S4810 8-3-12-1 64
5 Member online S4810 S4810 8-3-12-1 64
6 Member not present
7 Member not present
8 Member not present
9 Member not present
10 Member not present
11 Member not present
Related
Commands
show redundancy
s
Display the current redundancy configuration (status of automatic reboot configuration on
stack management unit).
Syntax
show redundancy
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show redundancy
FTOS#show redundancy
-- SSeries Redundancy Configuration --
------------------------------------------------
Auto reboot : Enabled
Version 8.3.1.0 Added hard reset option.
Version 7.8.1.0 Augmented to run on the standby unit in order to reset the standby unit directly.
Version 7.7.1.0 Introduced on S-Series
reload Reboot FTOS.
upgrade (S-Series management unit
and Z9000)
Reset the designated S-Series stack member.
Version 7.7.1.0 Introduced on S-Series