Reference Guide

1400 | S-Series Stacking Commands
www.dell.com | support.dell.com
redundancy disable-auto-reboot
s
Prevent the S-Series stack management unit, stack member unit, and standby unit from
rebooting if they fail.
Syntax
redundancy disable-auto-reboot [members | 0-11]
To return to the default, enter no redundancy disable-auto-reboot stack-unit.
The stack-unit range is 0-11.
Defaults
Disabled (the failed switch is automatically rebooted).
Command Modes
CONFIGURATION
Command
History
Usage
Information
Enabling this command keeps the failed switch in the failed state. It will not reboot until it is
manually rebooted. When enabled, it is not displayed in the running-config. When disabled, it
is displayed in the running-config.
Related
Commands
redundancy force-failover stack-unit
s
Force the standby unit in the stack to become the management unit.
Syntax
redundancy force-failover stack-unit
Defaults
Not enabled
Command Modes
EXEC Privilege
reset stack-unit
s
Reset any designated stack member except the management unit (master unit).
Syntax
reset stack-unit 0-11 hard
Parameters
Default
none
Command Modes
EXEC
Version 8.3.1.0 Added the members option
Version 7.7.1.0 Introduced on S-Series
show redundancy Display the current redundancy status.
0-11
Enter the stack member unit identifier of the stack member to reset.
hard
Reset the stack unit if the unit is in a problem state.