Reference Guide

140 | Control and Monitoring
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
Example
(C-Series)
FTOS#show tech-support page
----------------------------------- show version -------------------------------
Dell Force10 Networks Real Time Operating System Software
Dell Force10 Operating System Version: 1.0
Dell Force10 Application Software Version: FTOS 7.5.1.0
Copyright (c) 1999-2007 by Force10 Networks, Inc.
Build Time: Tue Sep 12 15:39:17 IST 2006
Build Path: /sites/maa/work/sw//C-SERIES/SW/SRC
Dell Force10 uptime is 18 minutes
System image file is "/work/sw/IMAGES/Chassis/C300-ODC-2/FTOS-CS.bin"
Chassis Type: C300
Control Processor: IBM PowerPC 750FX (Rev D2.2) with 1073741824 bytes of memory.
128K bytes of non-volatile configuration memory.
1 Route Processor/Switch Fabric Module
2 48-port GE 10/100/1000Base-T line card with RJ45 interface (CB)
1 FastEthernet/IEEE 802.3 interface(s)
96 GigabitEthernet/IEEE 802.3 interface(s)
----------------------------------- show HA information -------------------
-- RPM Status --
------------------------------------------------
RPM Slot ID: 0
RPM Redundancy Role: Primary
RPM State: Active
RPM SW Version: CS-1-1-317
Link to Peer: Down
Peer RPM: not present
-- RPM Redundancy Configuration --
------------------------------------------------
Primary RPM: rpm0
Auto Data Sync: Full
Failover Type: Hot Failover
Auto reboot RPM: Disabled
Auto failover limit: 3 times in 60 minutes
...more----
Example
(E-Series)
FTOS#show tech-support ?
linecard Line card
page Page through output
display, except,
find, grep,
no-more
If you use the pipe command ( | ), then enter one of these keywords to filter
command output. Refer to Filtering show Commands in the CLI Basics
chapter for details on filtering commands.
save
Enter the save keyword (following the pipe) to save the command output.
flash: Save to local flash drive (flash://filename (max 20 chars) )
slot0: Save to local file system (slot0://filename (max 20 chars) )
Version 7.8.1.0 Introduced save to file options
Version 7.5.1.0 Introduced on C-Series
Version 6.5.4.0 Show clock included in display on E-Series