Reference Guide

Simple Network Management Protocol and Syslog | 1393
To disable logging to logging buffer, Syslog server and terminal lines, enter no logging on.
Defaults
Enabled
Command Modes
CONFIGURATION
Command
History
Usage
Information
When you enter no logging on, messages are logged only to the console.
Related
Commands
logging source-interface
c e s z
Specify that the IP address of an interface is the source IP address of Syslog packets sent to
the Syslog server.
Syntax
logging source-interface
interface
To disable this command and return to the default setting, enter no logging source-interface.
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
logging Enable logging to Syslog server.
logging buffered Set the logging buffered parameters.
logging console Set the logging console parameters.
logging monitor Set the logging parameters for the terminal connections.