Reference Guide

134 | Control and Monitoring
www.dell.com | support.dell.com
Related
Commands
show software ifm
c s
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit unit-ID |
trace-flags}
Parameters
Part Num Displays the line card part number.
Vendor ID Displays an internal code, which specifies the manufacturing vendor.
Date Code Displays the line card’s manufacturing date.
Country Code Displays the country of origin.
01 = USA
Table 4-7. Descriptions of show rpm output
Field Description
show chassis View information on all elements of the system.
show linecard View information on a line card.
show sfm View information on the SFM.
clients
Enter the keyword clients to display IFM client information.
summary
(OPTIONAL) Enter the keyword summary to display brief information about
IFM clients.
ifagt number Enter the keyword ifagt followed by the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb followed by one of the following interface IDs followed
by the slot/port information to display interface control block information for that
interface:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet.
• For a Port Channel interface, enter the keyword port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a 10G Ethernet interface, enter the keyword TenGigabitEthernet.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
C-Series options also include:
• fastethernet for a Fast Ethernet interface
• loopback for a Loopback interface
• managementethernet for a Management Ethernet interface
• null for a Null interface
• vlan for a VLAN interface (Range: 1–4094, 1-2094 for ExaScale)
stack-unit
unit-ID
Enter the keyword stack-unit followed by the stack member number to display
IFM information for that unit.
Range: 0-1
Note: This option is only available on S-Series.