Reference Guide

Security | 1311
Defaults
Disabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
dot1x authentication (Interface)
c e s
Enable dot1x on an interface; dot1x must be enabled both globally and at the interface level.
Syntax
dot1x authentication
To disable dot1x on an interface, use the no dot1x authentication command.
Defaults
Disabled
Command Modes
INTERFACE
Command
History
Related
Commands
dot1x auth-fail-vlan
c e s
Configure a authentication failure VLAN for users and devices that fail 802.1X
authentication.
Syntax
dot1x auth-fail-vlan vlan-id
[max-attempts number]
To delete the authentication failure VLAN, use the
no dot1x auth-fail-vlan vlan-id [max-attempts
number
] command.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
dot1x authentication (Interface) Enable dot1x on an interface
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
dot1x authentication (Configuration) Enable dot1x globally