Reference Guide

1302 | Security
www.dell.com | support.dell.com
Parameters
Defaults
0 seconds
Command Modes
CONFIGURATION
Command
History
radius-server host
c e s
Configure a RADIUS server host.
Syntax
radius-server
host {hostname | ipv4-address | ipv6-address} [auth-port port-number] [retransmit
retries] [timeout seconds] [key [encryption-type] key]
Parameters
seconds
Enter a number of seconds during which non-responsive RADIUS servers are
skipped.
Range: 0 to 2147483647 seconds.
Default: 0 seconds.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
hostname
Enter the name of the RADIUS server host.
ipv4-address | ipv6-address Enter the IPv4 address (A.B.C.D) or IPv6 address
(X:X:X:X::X), of the RADIUS server host.
auth-port port-number (OPTIONAL) Enter the keyword auth-port followed by a
number as the port number.
Range: zero (0) to 65535
The default port-number is 1812.
retransmit retries (OPTIONAL) Enter the keyword retransmit followed by a
number as the number of attempts. This parameter overwrites the
radius-server retransmit command.
Range: zero (0) to 100
Default: 3 attempts