Reference Guide

Security | 1285
Usage
Information
By default, the command aaa authorization commands configures the system to check both
EXEC level and CONFIGURATION level commands. Use the command
no aaa authorization
config-commands
to enable only EXEC-level command checking.
aaa authorization exec
c e s
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
Syntax
aaa authorization exec
{name | default} {local || tacacs+ || if-authenticated || none}
Disable authorization checking for EXEC level commands using the command
no aaa
authorization exec
.
Parameters
Defaults
None
Command Modes
CONFIGURATION
Command
History
privilege level (CONFIGURATION mode)
c e s
Change the access or privilege level of one or more commands.
Syntax
privilege mode
{level level command | reset command}
To delete access to a level and command, use the
no privilege mode level level command
command.
name
Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform
authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter this keyword to apply no authorization.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
Version 6.1.1.0 Added support for RADIUS