Reference Guide

1280 | Security
www.dell.com | support.dell.com
As with authentication and authorization, you must configure AAA Accounting by defining
named list of accounting methods, and then apply that list to various interfaces. The
commands are:
• aaa accounting
• aaa accounting suppress
• accounting
• show accounting
aaa accounting
c e s
Enable AAA Accounting and create a record for monitoring the accounting function.
Syntax
aaa accounting
{system | exec | commands level} {name | default} {start-stop | wait-start | stop-only}
{tacacs+}
To disable AAA Accounting, use the no aaa accounting {system | exec | command level} {name |
default} {start-stop | wait-start | stop-only} {tacacs+} command.
Parameters
Defaults
No default configuration or behavior
Command Modes
CONFIGURATION
Command
History
system
Enter the keyword system to send accounting information of any other AAA
configuration.
exec
Enter the keyword exec to send accounting information when a user has
logged in to the EXEC mode.
commands level
Enter the keyword command followed by a privilege level for accounting of
commands executed at that privilege level.
name | default
Enter one of the following:
• For name, a user-defined name of a list of accounting methods
• default for the default accounting methods
start-stop
Enter the keyword start-stop to send a “start accounting” notice at the
beginning of the requested event and a “stop accounting” notice at the end of
the event.
wait-start
Enter the keyword wait-start to ensure that the TACACS+ security server
acknowledges the start notice before granting the user’s process request.
stop-only
Enter the keyword stop-only to instruct the TACACS+ security server to
send a “stop record accounting” notice at the end of the requested user
process.
tacacs+
Enter the keyword tacacs+ to use TACACS+ data for accounting. FTOS
currently only supports TACACS+ accounting.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced for S-Series