Reference Guide

1240 | Routing Information Protocol (RIP)
www.dell.com | support.dell.com
Command
History
Related
Commands
ip poison-reverse
c e s
Set the prefix of the RIP routing updates to the RIP infinity value.
Syntax
ip poison-reverse
To disable poison reverse, enter no ip poison-reverse.
Defaults
Disabled.
Command Modes
INTERFACE
Command
History
Related
Commands
ip rip receive version
c e s
Set the interface to receive specific versions of RIP. The RIP version you set on the interface
overrides the version command in the ROUTER RIP mode.
Syntax
ip rip receive version [1] [2]
To return to the default, enter
no ip rip receive version.
Parameters
Defaults
RIPv1 and RIPv2
Command Modes
INTERFACE
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
ip prefix-list Enter the PREFIX-LIST mode and configure a prefix list.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
ip split-horizon Set RIP routing updates to exclude routing prefixes.
1
(OPTIONAL) Enter the number 1 for RIP version 1.
2
(OPTIONAL) Enter the number 2 for RIP version 2.