Reference Guide

1204 | Quality of Service (QoS)
www.dell.com | support.dell.com
service-policy output
c e s
Apply an output policy map to the selected interface.
Syntax
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output
policy-map-name command.
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE
Command
History
Usage
Information
A single policy-map can be attached to one or more interfaces to specify the service-policy
for those interfaces. A policy map attached to an interface can be modified.
Related
Commands
service-queue
c e s
Assign a class map and QoS policy to different queues.
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name]
To remove the queue assignment, use the
no service-queue queue-id [class-map
class-map-name] [qos-policy qos-policy-name] command.
Parameters
policy-map-name
Enter the name for the policy map in character format (16 characters
maximum). You can identify an existing policy map or name one
that does not yet exist.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
pre-Version 6.1.1.1 Introduced on E-Series
policy-map-output Create an output policy map.
queue-id
Enter the value used to identify a queue.
Range: 0 to 7 on E-Series (eight queues per interface), 0-3 on
C-Series and S-Series (four queues per interface; four queues are
reserved for control traffic.)