Reference Guide

Quality of Service (QoS) | 1193
Related
Commands
match mac vlan
c e s
Configure a match criterion for a class map based on VLAN ID.
Syntax
match mac vlan number
Parameters
Defaults
None
Command Modes
class-map
Command
History
Usage
Information
You must first enter the class-map command in order to access this command. You can match
against only one VLAN ID.
Related
Commands
policy-aggregate
c e s
Allow an aggregate method of configuring per-port QoS via policy maps. An aggregate QoS
policy is part of the policy map (input/output) applied on an interface.
Syntax
policy-aggregate qos-policy-name
To remove a policy aggregate configuration, use no policy-aggregate qos-policy-name
command.
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (policy-map-input and policy-map-output)
Command
History
class-map Identify the class map.
number
Enter the VLAN ID.
Range: 1 to 4094
Version 8.3.7.0 Introduced on S4810
Version 8.2.0.1 Introduced
class-map Create/access a class map.
qos-policy-name
Enter the name of the policy map in character format (32 characters
maximum)
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Policy name character limit increased from 16 to 32.
Version 7.6.1.0 Introduced on S-Series