Reference Guide

1162 | Per-VLAN Spanning Tree Plus (PVST+)
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
Example
FTOS#conf
FTOS(conf)#protocol spanning-tree pvst
FTOS(conf-pvst)#no disable
FTOS(conf-pvst)#vlan 2 bridge-priority 4096
FTOS(conf-pvst)#vlan 3 bridge-priority 16384
FTOS(conf-pvst)#
FTOS(conf-pvst)#show config
!
protocol spanning-tree pvst
no disable
vlan 2 bridge-priority 4096
vlan 3 bridge-priority 16384
FTOS#
Usage
Information
Once PVST+ is enabled, the device runs an STP instance for each VLAN it supports.
Related
Commands
show spanning-tree pvst
c e s
View the Per-VLAN Spanning Tree configuration.
Syntax
show spanning-tree pvst [vlan vlan-id] [brief] [guard]
Parameters
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.2.1.1 Introduced
disable Disable PVST+.
show spanning-tree pvst Display the PVST+ configuration.
vlan vlan-id
(OPTIONAL) Enter the keyword vlan followed by the VLAN ID.
Range: 1 to 4094
brief
(OPTIONAL) Enter the keyword brief to view a synopsis of the PVST+
configuration information.