Reference Guide

Control and Monitoring | 115
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output for show memory displays the memory usage of LP part (sysdlp) of the system.
The Sysdlp is an aggregate task that handles all the tasks running on C-Series’ and E-Series'
LP.
In FTOS Release 7.4.1.0 and higher, the total counter size (for all 3 CPUs) in show memory
(C-Series and E-Series) and show processes memory (C-Series and E-Series) will differ based
on which FTOS processes are counted.
• In the show memory (C-Series and E-Series) display output, the memory size is
equal to the size of the application processes.
• In the show processes memory (C-Series and E-Series) display output, the
memory size is equal to the size of the application processes plus the size of the
system processes.
Example
(E-Series)
FTOS#show memory
Statistics On CP Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
452689184 64837834 387851350 387805590 371426976
Statistics On RP1 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
629145600 4079544 625066056 625066056 0
Statistics On RP2 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
510209568 47294716 462914852 462617968 446275376
FTOS#
cp
(OPTIONAL) Enter the keyword cp to view information on the Control
Processor on the RPM.
lp slot-number (OPTIONAL) Enter the keyword lp and the slot number to view information
on the line-card processor in that slot.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E600i, and 0 to
5 on a E300.
rp1
(OPTIONAL) Enter the keyword rp1 to view information on Route
Processor 1 on the RPM.
Note: This option is supported on the E-Series only.
rp2
(OPTIONAL) Enter the keyword rp2 to view information on Route Processor
2 on the RPM.
Note: This option is supported on the E-Series only.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command