Reference Guide
114 | Control and Monitoring
www.dell.com | support.dell.com
Table 4-2 defines the fields in the example.
Usage
Information
The display area of this command uses the maximum 80 character length. If your display area
is not set to 80 characters, the display will wrap.
Related
Commands
show memory (C-Series and E-Series)
c e
View current memory usage on the system.
Syntax
show memory [cp | lp slot-number | rp1 | rp2]
Table 4-2. Descriptions for show linecard boot-information output
Field Description
# Displays the line card slot numbers, beginning with slot 0. The number of slots
listed is dependent on your chassis:
E-Series: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300.
Status Indicates if a line card is online, offline, or booting. If a line card is not detected
in the slot, a hyphen ( - ) is displayed.
CurType Displays the line card identification number, for example EXW4PF.
Serial number Displays the line card serial number.
Booted from Indicates whether the line card cache booted or system booted. In addition, the
image with which the line card booted is also displayed. If the line card cache
booted, then the output is A: or B: followed by the image in the flash partition (A:
6.5.1.4 or B: 6.5.1.4).
If the line card system booted, then display is the current FTOS version number
(6.5.1.4).
Next boot Indicates if the next line card boot is a cache boot or system boot and which
image will be used in the boot.
Cache boot Displays the system image in cache boot flash partition A: and B: for the line
card. If the cache boot does not contain a valid image, “invalid” is displayed.
Boot flash Displays the two possible Boot flash versions. The [b] next to the version number
is the current boot flash, that is the image used in the last boot.
show linecard View the line card status
upgrade (E-Series version) Upgrade the boot flash, boot selector, or system image
download alt-boot-image Download an alternate boot image to the chassis
download alt-full-image Download an alternate FTOS image to the chassis
download alt-system-image Download an alternate system image to the chassis










