Reference Guide

1126 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
Example
FTOS#show ip pim snooping tib
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
SGR-P - (S,G,R) Prune
Timers: Uptime/Expires
* : Inherited port
(*, 225.1.2.1), uptime 00:00:01, expires 00:02:59, RP 165.87.70.1, flags: J
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
GigabitEthernet 4/11 RPF 165.87.32.2 00:00:01/00:02:59
GigabitEthernet 4/13 Upstream Port -/-
FTOS#show ip pim snooping tib vlan 2 225.1.2.1 165.87.1.7
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
SGR-P - (S,G,R) Prune
Timers: Uptime/Expires
* : Inherited port
(165.87.1.7, 225.1.2.1), uptime 00:00:08, expires 00:02:52, flags: j
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
GigabitEthernet 4/11 Upstream Port -/-
GigabitEthernet 4/13 DR Port -/-
GigabitEthernet 4/20 RPF 165.87.32.10 00:00:08/00:02:52
Table 38-5. show ip pim snooping tib Command Example Fields
Field Description
(S, G) Displays the entry in the PIM multicast snooping database.
uptime Displays the amount of time the entry has been in the PIM
multicast route table.
expires Displays the amount of time until the entry expires and is removed
from the database.
RP Displays the IP address of the RP/source for this entry.