Reference Guide

1124 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip pim snooping interface
Interface Ver Nbr DR DR
Count Prio
Vlan 2 v2 3 1 165.87.32.2
show ip pim snooping neighbor
e
x
Display information on PIM neighbors learned through PIM-SM snooping.
Syntax
show ip pim snooping neighbor
[vlan vlan-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
vlan
vlan-id (OPTIONAL) Enter a VLAN ID to display information about a specified
VLAN configured for PIM-SM snooping. Valid VLAN IDs: 1 to 4094.
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.1 Introduced on E-Series ExaScale
Table 38-3. show ip pim snooping interface Command Example Fields
Field Description
Interface Displays the VLAN interfaces with PIM-SM snooping enabled.
Ver/Mode Displays the PIM version number for each VLAN interface with
PIM-SM snooping enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of neighbors learned through PIM-SM
snooping on the interface.
DR Prio Displays the Designated Router priority value configured on the
interface (ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that interface.
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about PIM neighbors
that was discovered by PIM-SM snooping on a specified VLAN.
Valid VLAN IDs: 1 to 4094.
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.1 Introduced on E-Series ExaScale