Reference Guide

1092 | Open Shortest Path First (OSPFv2)
www.dell.com | support.dell.com
Related
Commands
show ip ospf database summary
c e s
Display the network summary (type 3) LSA routing information.
Syntax
show ip ospf process-id database summary [link-state-id] [adv-router ip-address]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip ospf 100 database summary
OSPF Router with ID (1.1.1.10) (Process ID 100)
Summary Network (Area 0.0.0.0)
LS age: 1551
Options: (No TOS-capability, DC, E)
LS type: Summary Network
Link State ID: 192.68.16.0
(Link ID) Identifies the link type and address.
(Link Data) Identifies the router interface address.
Number of TOS Metric Lists the number of TOS metrics.
TOS 0 Metric Lists the number of TOS 0 metrics.
Table 37-8. Command Example Descriptions: show ip ospf process-id database
router
Item Description
show ip ospf database Displays OSPF database information.
process-id Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value
depends on the LSA type, and it can be one of the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router
ip-address
(OPTIONAL) Enter the keywords adv-router ip-address to display only the
LSA information about that router.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced support of Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series