Reference Guide

1058 | Open Shortest Path First (OSPFv2)
www.dell.com | support.dell.com
Command
History
Usage
Information
T
o specify a distance for routes learned from other routing domains, use the redistribute
command.
distribute-list in
c e s
Apply a filter to incoming routing updates from OSPF to the routing table.
Syntax
distribute-list prefix-list-name in [interface]
To delete a filter, use the
no distribute-list prefix-list-name in [interface] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER OSPF
Command
History
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
prefix-list-name Enter the name of a configured prefix list.
interface
(OPTIONAL) Enter one of the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For Port Channel groups, enter the keyword port-channel followed by
a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1-255 for TeraScale
• For a SONET interface, enter the keyword sonet followed by the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from 1 to
4094.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE
followed by the slot/port information.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series