Reference Guide

Control and Monitoring | 105
12 not present
13 not present
-- RPM Environment Status --
Slot Status Temp PEM0 PEM1 Voltage
---------------------------------------------------------------------------
0 active 48C down up ok
1 not present
-- SFM Environment Status --
Slot Status Temp PEM0 PEM1
---------------------------------------------------------------------------
0 active 49C up up
1 active 47C up up
2 active 46C up up
3 active 48C up up
4 active 52C up up
5 active 50C up up
6 active 47C up up
7 active 48C up up
8 active 47C up up
Example (E600)
FTOS#show environment fan
-- Fan Status --
Status Temp Fan1 Fan2 Fan3 Serial Num Version
------------------------------------------------------------------
up 29C 6000 RPM 7500 RPM 7500 RPM 0.0
FTOS#
Example (C300)
FTOS#show env fan
-- Fan Status --
-------------------------------------------------------------------
Tray 0
-------------------------------------------------------------------
FanNumber Speed Status
0 4170 up
1 4140 up
2 3870 up
3 4140 up
4 3870 up
5 3810 up
FTOS#
show environment (S-Series)
s
View S-Series system component status (for example, temperature, voltage).
Syntax
show environment [all | fan | stack-unit unit-id | pem]
Parameters
all
Enter the keyword all to view all components.
fan
Enter the keyword fan to view information on the fans. The output of this
command is chassis dependent.