Reference Guide

Object Tracking | 1031
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
Example
FTOS#show track
Track 1
IP route 23.0.0.0/8 reachability
Reachability is Down (route not in route table)
2 changes, last change 00:16:08
Tracked by:
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is GigabitEthernet 13/2
Tracked by:
VRRP GigabitEthernet 7/30 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is GigabitEthernet 13/2
Tracked by:
VRRP GigabitEthernet 7/30 IPv6 VRID 1
object-id
(OPTIONAL) Display information on the specified tracked object.
Range: 1 to 65535.
interface
(OPTIONAL) Display information on all tracked interfaces (Layer 2 and IPv4 Layer 3).
ip route
(OPTIONAL) Display information on all tracked IPv4 routes.
resolution
(OPTIONAL) Display information on the configured resolution values used to scale
protocol-specific route metrics to the range 0 to 255.
brief
(OPTIONAL) Display a single line summary of the tracking information for a specified
object, object type, or all tracked objects.
vrf vrf-name
(OPTIONAL) E-Series only: Display information on only the tracked objects that are
members of the specified VRF instance. Maximum: 32 characters.
If you do not enter a VRF name, information on the tracked objects from all VRFs is
displayed.
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced
show running-config track Display configuration information about tracked objects.
track interface ip routing Configure object tracking on the routing status of an IPv4 Layer 3
interface.
track interface line-protocol Configure object tracking on the line-protocol state of a Layer 2 interface.
track ip route metric threshold Configure object tracking on the threshold of an IPv4 route metric.
track ip route reachability Configure object tracking on the reachability of an IPv4 route.
Table 36-1. Command Example Description: show track
show track Output Description
Track object-id Displays the number of the tracked object.