Reference Guide

Multicast | 1005
To delete a specific static mroute, use the command ip mroute destination mask {ip-address | null
0
| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance].
To delete all mroutes matching a certain mroute, use the
no ip mroute destination mask
command.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Related
Commands
ip multicast-lag-hashing
e
Distribute multicast traffic among Port Channel members in a round-robin fashion.
Syntax
ip multicast-lag-hashing
destination
Enter the IP address in dotted decimal format of the destination
device.
mask Enter the mask in slash prefix formation ( /x ) or in dotted
decimal format.
null 0
(OPTIONAL) Enter the null followed by zero (0).
[protocol [process-id | tag]
ip-address]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number followed by the IP address in
dotted decimal format of the reverse path forwarding (RPF)
neighbor.
Range:1-65535
• Enter the OSPF process identification number followed by
the IP address in dotted decimal format of the reverse path
forwarding (RPF) neighbor.
Range: 1-65535
• Enter the IS-IS alphanumeric tag string followed by the IP
address in dotted decimal format of the reverse path
forwarding (RPF) neighbor.
• Enter the RIP IP address in dotted decimal format of the
reverse path forwarding (RPF) neighbor.
static ip-address (OPTIONAL) Enter the Static IP address in dotted decimal
format of the reverse path forwarding (RPF) neighbor.
ip-address (OPTIONAL) Enter the IP address in dotted decimal format of
the reverse path forwarding (RPF) neighbor.
distance
(OPTIONAL) Enter a number as the distance metric assigned to
the mroute.
Range: 0 to 255
Version 8.3.7.0 Introduced on S4810
E-Series legacy command
show ip mroute View the E-Series routing table.