Reference Guide

670 | Object Tracking
www.dell.com | support.dell.com
Figure 32-151. Command Example: track ipv6 route metric threshold
Displaying Tracked Objects
You can display the currently configured objects used to track Layer 2 and Layer 3 interfaces, and IPv4
and IPv6 routes, by entering the following
show commands:
•
show track [object-id [brief] | interface [brief] [vrf vrf-name] | ip route [brief] [vrf vrf-name] | resolution
| vrf vrf-name [brief] | brief]
Use the show track command to display the configuration and status of currently tracked Layer 2 or
Layer 3 interfaces, IPv4 or IPv6 routes, or a VRF instance. You can also display the currently config-
ured per-protocol resolution values used to scale route metrics when tracking metric thresholds.
FTOS(conf)#track 8 ipv6 route 2::/64 metric threshold
FTOS(conf-track-8)#threshold metric up 30
FTOS(conf-track-8)#threshold metric down 40