Reference Guide

34 | Configuration Fundamentals
www.dell.com | support.dell.com
CONFIGURATION
FTOS(conf)# • From EXEC privilege mode, enter the command
configure.
• From every mode except EXEC and EXEC
Privilege, enter the command
exit.
Note: Access all of the following modes from CONFIGURATION mode.
ARCHIVE
FTOS(conf-archive)
archive
AS-PATH ACL
FTOS(config-as-path)#
ip as-path access-list
INTERFACE modes
Gigabit Ethernet
Interface
FTOS(conf-if-gi-0/0)#
interface
10 Gigabit Ethernet
Interface
FTOS(conf-if-te-0/0)#
Interface Range
FTOS(conf-if-range)#
Loopback Interface
FTOS(conf-if-lo-0)#
Management Ethernet
Interface
FTOS(conf-if-ma-0/0)#
Null Interface
FTOS(conf-if-nu-0)#
Port-channel Interface
FTOS(conf-if-po-0)#
SONET Interface
FTOS(conf-if-so-0/0)#
VLAN Interface
FTOS(conf-if-vl-0)#
IP ACCESS-LIST
STANDARD ACCESS-
LIST
FTOS(config-std-nacl)#
ip access-list standard
EXTENDED ACCESS-
LIST
FTOS(config-ext-nacl)#
ip access-list extended
IP COMMUNITY-LIST
FTOS(config-community-list)#
ip community-list
LINE
AUXILIARY
FTOS(config-line-aux)#
line
CONSOLE
FTOS(config-line-console)#
VIRTUAL TERMINAL
FTOS(config-line-vty)#
MAC ACCESS-LIST
STANDARD ACCESS-
LIST
FTOS(config-std-macl)#
mac access-list standard
EXTENDED ACCESS-
LIST
FTOS(config-ext-macl)#
mac access-list extended
Table 2-2. FTOS Command Modes
CLI Command Mode Prompt
Access Command