Reference Guide

Data Center Bridging (DCB) | 303
Figure 13-9. show dot1p-queue mapping Command Example
Figure 13-10. show dcb Command Example
Figure 13-11. show qos dcb-input Command Example
show qos dcb-input [pfc-profile] Displays the PFC configuration in a DCB input policy.
show qos dcb-output [ets-profile]
Displays the ETS configuration in a DCB output policy.
show qos priority-groups
Displays the ETS priority groups configured on the switch, including the
802.1p priority classes and ID of each group.
show interface port-type slot/port pfc
{summary | detail}
Displays the PFC configuration applied to ingress traffic on an interface,
including priorities and link delay.
To clear PFC TLV counters, use the clear pfc counters interface port-type
slot/port command.
show interface port-type slot/port pfc statistics Displays counters for the PFC frames received and transmitted (by dot1p
priority class) on an interface.
show interface port-type slot/port ets
{summary | detail}
Displays the ETS configuration applied to egress traffic on an interface,
including priority groups with priorities and bandwidth allocation.
To clear ETS TLV counters, enter the
clear ets counters interface port-type
slot/port command.
show interface port-type slot/port DCBx detail Displays the DCBx configuration on an interface.
show stack-unit {0-11 | all} stack ports all pfc
details
Displays the PFC configuration applied to ingress traffic on stack-links,
including priorities and link delay.
show stack-unit {0-11 | all} stack ports all ets
details
Displays the ETS configuration applied to ingress traffic on stack-links,
including priorities and link delay.
Table 13-25. Displaying DCB Configurations
Command Output
FTOS(conf)# show dot1p-queue-mapping
Dot1p Priority: 0 1 2 3 4 5 6 7
Queue : 0 0 0 1 2 3 3 3
FTOS# show dcb
stack-unit 0 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
FTOS(conf)# show qos dcb-input
dcb-input pfc-profile
pfc link-delay 32
pfc priority 0-1
dcb-input pfc-profile1
no pfc mode on
pfc priority 6-7