Setup Guide

Specications
This section lists the S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch
specications.
CAUTION: Operate the product at an ambient temperature not higher than 113°F—
45°C.
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is
incorrectly replaced. Replace only with same or equivalent type of battery. Dispose
of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see Restricted Material Compliance.
Chassis physical design
Table 1. Chassis physical design
Parameter Specications
Height 1.72 inches (44 mm)
Width 17.1 inches (434 mm)
Depth
18.2 inches (462 mm)
PSU/fan tray handle: 1.57 inches (40 mm)
Chassis weight with factory-installed
components
22 lbs (2* PSUs)
9.98 kg (2* PSUs)
Rack clearance required
Front: 5 inches (12.7 cm)
4
Specications 25