Install Guide

Table 6. Environmental parameters (continued)

Parameter Specifications

NOTE: Reduce maximum temperature by 1°C/300 meters

(1°F/547 feet) above 950 meters (3,117 feet).

Operating humidity 5% to 85% (RH), non-condensing, continuously

5% to 90% (RH), non-condensing, short term

Short term is </= 1% of operational hours per year.

Storage temperature –40° to 70°C (–40° to 158°F )

Storage humidity 5% to 95%, non-condensing

Maximum thermal output 600 W = 2047 BTU/Hr

Maximum operational altitude 10,000 feet (3,048 meters)

Maximum non-operational altitude 39,370 feet (12,000 meters)

Shock Dell EMC Spec SV0115

Table 7. AC power requirements

Parameter Specifications

Power supply 100–240 VAC 50/60 Hz

Maximum current draw per system 6A/5A at 100/120V AC 3A/2.5A at 200/240V AC

Maximum power consumption 600 Watts

Typical power consumption 300 Watts

Table 8. DC power requirements

Parameter Specifications

Minimum and maximum input voltage range −40.5, –60V DC, 15A Max

Maximum power consumption 600 Watts

Start up VDC 39.0 ± 1.5 V

Start off VDC 37.5 ± 1.5 v

IEEE standards

The S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch complies with the following IEEE standards:

● 802.1ab (LLDP)

● 802.1ax (Layer 2)

● 802.1d, 802.1w, 802.1s, 802.1x (Mgmt/Security), 802.3x (Layer 2)

● 802.3 (1000BASE-KX)

● 802.3ba (40GbE and 100GbE ports)

Specifications