Install Guide

Specifications

This section lists the S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch specifications.

CAUTION: Operate the product at an ambient temperature not higher than 113°F—45°C.

CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace

only with same or equivalent type of battery. Dispose of the batteries according to the manufacturer's

instructions.

NOTE: For RoHS information, see Restricted Material Compliance.

Topics:

• Chassis physical design

• IEEE standards

• Agency compliance

• USA Federal Communications Commission statement

• European Union EMC directive conformance statement

• Japan VCCI compliance for class A equipment

• Korean certification of compliance

• Electromagnetic compatibility

• Safety standards and compliance agency certifications

• Product recycling and disposal

Chassis physical design

Table 5. Chassis physical design

Parameter Specifications

Height 1.72 inches (44 mm)

Width 17.1 inches (434 mm)

Depth

18.2 inches (462 mm)

PSU/fan tray handle: 1.57 inches (40 mm)

Chassis weight with factory-installed components

22 lbs (2* PSUs)

9.98 kg (2* PSUs)

Rack clearance required

Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)

Table 6. Environmental parameters

Parameter Specifications

Operating temperature 0°C to 45°C (32°F to 113°F) continuously

-5°C to 45°C (23°F to 113°F) short term

Short term is </= 1% of operational hours per year.

Specifications 41