Install Guide

● Torx screwdriver, not included
● Ground cable screws, included
● Copper or fiber cables
Other optional components are:
● Ground cable and lug for the frame-end of the ground cable
● Extra power supply unit
● Extra fan module
● Extra mounting brackets if installing in a four-post rack or cabinet
S4200-ON configurations
You can order the S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch in several different configurations.
● S4248FB–ON or S4248FBL-ON AC normal airflow: Forty 1/10GbE SFP+ ports, two 40GbE or 4x1/10GbE QSFP+, and six
100/40GbE or 4x25/10GbE or 2x50GbE QSFP28 ports, two AC power supplies, and five fan subsystems with airflow from
the I/O side to the power supply side
● S4248FB–ON or S4248FBL-ON AC reverse airflow: Forty 1/10GbE SFP+ ports, two 40GbE or 4x1/10GbE QSFP+, and six
100/40GbE or 4x25/10GbE or 2x50GbE QSFP28 ports, two AC power supplies, and five fan subsystems with airflow from
the power supply side to the I/O side
● Fan with airflow from the I/O side to the PSU side
● Fan with airflow from the PSU side to the I/O side
● AC Power supply with airflow from the I/O side to the PSU side—normal
● AC Power supply with airflow from the PSU side to the I/O side—reverse
● DC Power supply with airflow from the I/O side to the PSU side—normal
● DC Power supply with airflow from the PSU side to the I/O side—reverse
Luggage tag
The S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch has a pull-out tag, known as a luggage tag, on the I/O-side of
the switch. The front of the luggage tag includes switch ID information. The back of the luggage tag includes a QRL that takes
you to a Dell EMC How-To site where you can watch videos about racking the switch, replacing components, configuring port
channels, and so on.
S4200-ON series switch
11