Specifications
Table Of Contents
- Open Networking Hardware Diagnostic Guide September 2017
- About this guide
- ONIE and Dell EMC OS installation instructions
- ONIE overview
- Dell EMC DIAG OS
- Dell EMC DiagOS tools
- Technical support
Figure 9. Upgrade region A
5 Ensure that MSS has upgraded successfully by using the smarttool –gmv /dev/ttyS0 command after the system reboots.
Figure 10. Check MSS upgrade
Upgrading SMF FPGA
To upgrade your system using the FPGA method, follow these steps.
1 Copy all the binaries needed for upgrade into a local directory.
78
Dell EMC DiagOS tools