Deployment Guide

56
ScaleIO/VxFlex OS IP Fabric Best Practice and Deployment Guide with OS10EE | version 1.0
• Configure SVM.
- Configure ScaleIO Virtual Machine (SVM) IP addresses.
- Enter IP information for all SVMs.
- See Table 11 for IP information for this deployment example.
- This example uses 172.17.34.4 is used for the Cluster Virtual IP address, network ScaleIO-
data01.
ScaleIO Wizard – Configure SVM
ESXi Name
(function)
Mgmt IP & Subnet
Mask
Default Gateway Data IP & Subnet Mask
ScaleIO-172.17.33.11-GW
(ScaleIO Gateway)
172.17.33.11
/ 255.255.255.0
172.17.33.253
172.17.34.11
/ 255.255.255.0
ScaleIO-172.17.33.12
(Master MDM)
172.17.33.12
/ 255.255.255.0
172.17.33.253
172.17.34.12
/ 255.255.255.0
ScaleIO-172.17.33.13
(Slave 1 MDM)
172.17.33.13
/ 255.255.255.0
172.17.33.253
172.17.34.13
/ 255.255.255.0
ScaleIO-172.17.33.14
(TieBreaker 1)
172.17.33.14
/ 255.255.255.0
172.17.33.253
172.17.34.14
/ 255.255.255.0
ScaleIO-172.17.33.15
172.17.33.15
/ 255.255.255.0
172.17.33.253
172.17.34.15
/ 255.255.255.0
P
ress Finish to begin the ScaleIO deployment process.
C.2.4 Deployment wizard modifications
The wizard does not support all deployment and network topology scenarios. This section describes two
specific design details used in this deployment example that need to be addressed midway through the
deployment. The deployment wizard is expected to fail device tasks and pauses the deployment at those
points. After changes are made to the configuration, the wizard resumes the deployment.
Routed leaf-spine
The deployment wizard is designed for networks that do not deploy routing at the leaf layer. The SVM .ova
supplied with the ScaleIO package includes a single IP stack which has a single default gateway. That
gateway supports the out of band management network.
The network architecture for routed leaf-spine requires a route to add a next hop to the storage network. Each
rack in a routed leaf-spine is its own L2 domain.