Deployment Guide

43 ScaleIO/VxFlex OS IP Fabric Best Practice and Deployment Guide with OS10EE | version 1.0
4.6.3 QoS validation
Monitor QoS marking and performance on the switches through show commands. This section details the
show command that can be used to evaluate if the QoS configuration is functioning. The statistics below are
from application and storage traffic generated by a test traffic generator.
Following is from OS10 with QoS policy applied above. Shows no dropped packets exiting queue 3.
OS10# show queuing statistics interface eth 1/1/21
Interface ethernet1/1/21
Queue Packets Bytes Dropped-Packets Dropped-Bytes
0 5748974 8623461000 592542 888813000
1 0 0 0 0
2 0 0 0 0
3 634152 951228000 0 0
4 0 0 0 0
5 0 0 0 0
6 0 0 0 0
7 0 0 0 0