Deployment Guide

31 ScaleIO/VxFlex OS IP Fabric Best Practice and Deployment Guide with OS10EE | version 1.0
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------
* 1 port-channel2 up 1 1
2 port-channel2 up 1 1
vlt-port-channel ID : 3
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------
* 1 port-channel3 up 1 1
2 port-channel3 up 1 1
vlt-port-channel ID : 4
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------
* 1 port-channel4 up 1 1
2 port-channel4 up 1 1
vlt-port-channel ID : 5
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------
* 1 port-channel5 up 1 1
2 port-channel5 up 1 1
vlt-port-channel ID : 6
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------
* 1 port-channel6 up 1 1
2 port-channel6 up 1 1
vlt-port-channel ID : 7
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------
* 1 port-channel7 up 1 1
2 port-channel7 up 1 1
vlt-port-channel ID : 8
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------
* 1 port-channel8 up 1 1
2 port-channel8 up 1 1
rack1-leaf-A#
3.3.8 Configure teaming and failover on LAGs
To configure teaming and failover on LAGs, complete the following steps:
1. On the web client Home screen, select Networking.
2. Right click on the VDS. Select Distributed Port Group > Manage Distributed Port Groups.
3. Select only the Teaming and failover checkbox. Click Next.
4. Click Select distributed port groups. Check the boxes for the management, ScaleIO-management,
and vMotion port groups. Click OK > Next.