Deployment Guide

30
ScaleIO/VxFlex OS IP Fabric Best Practice and Deployment Guide with OS10EE | version 1.0
Uplinks configured on ScaleIO VDS
This configuration brings up the LAGs on the upstream switches. Confirm the configuration by running the vlt-
port-detail show command on the upstream switches as shown in the example below. The Status column
now indicates all LAGs are up.
rack1
-leaf-A# show vlt 127 vlt-port-detail
vlt-port-channel ID : 1
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------
* 1 port-
channel1 up 1 1
2 port-
channel1 up 1
1
vlt-port-channel ID : 2