Deployment Guide

26 ScaleIO/VxFlex OS IP Fabric Best Practice and Deployment Guide with OS10EE | version 1.0
Distributed switches with each port group created
3.3.6 Create LACP LAGs
Since Link Aggregation Control Protocol (LACP) LAGs are used in the physical network between ESXi hosts
and physical switches, LACP LAGs are also configured on each VDS.
To enable LACP on the VDS, complete the following steps:
1. On the web client Home screen, select Networking.
2. In the Navigator pane, select the VDS.
3. In the center pane, select Configure > Settings > LACP.
4. Click the icon. The New Link Aggregation Group dialog box opens.
5. In this example, the default name is kept as lag1. Set number of ports to 2.
6. Set the Mode to Active. The remaining fields can be set to their default values as shown in Figure
19.
7. Click OK to close the dialog box.