Deployment Guide

24 ScaleIO/VxFlex OS IP Fabric Best Practice and Deployment Guide with OS10EE | version 1.0
VDS created for compute and ScaleIO
3.3.5 Add distributed port groups
In this section, separate distributed port groups for management, ScaleIO-management, vMotion, and
ScaleIO-data01are added to the VDS.
To create the port group for management traffic on the VDS, complete the following steps:
1. On the web client Home screen, select Networking.
2. Right-click the VDS. Select Distributed Port Group > New Distributed Port Group.
3. On the Select name and location page, provide a name for the distributed port group, for example,
vMotion. Click Next.
4. On the Configure settings, next to VLAN type, select VLAN. Set the VLAN ID to 1731 for the
management port group. Leave other values at their defaults as shown in Figure 17.
5. Click Next > Finish.