Deployment Guide

23 ScaleIO/VxFlex OS IP Fabric Best Practice and Deployment Guide with OS10EE | version 1.0
vMotion port group
3.3.4 Create the VDS
To create the VDS complete the following steps:
1. On the web client Home screen, select Networking.
2. Right-click Datacenter. Select Distributed switch > New Distributed Switch.
3. Provide a name for the VDS. Click Next.
4. On the Select version page, select Distributed switch: 6.5.0 > Next.
5. On the Edit settings page:
a. Set the Number of uplinks to 4.
b. Leave Network I/O Control set to Enabled.
c. Uncheck the Create a default port group box.
6. Click Next followed by Finish.
7. The VDS is created with the dvUplink port group shown beneath it.
When complete, the Navigator pane should look similar to Figure 16.