Reference Guide

Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show alarms summary
Active-alarm Summary
-----------------------
Total-count: 6
Critical-count: 0
Major-count: 2
Minor-count: 2
Warning-count: 2
-----------------------
Supported Releases 10.2.0E or later
Logging commands
clear logging
Clears messages in the logging buer.
Syntax
clear logging log-file
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear logging log-file
Proceed to clear the log file [confirm yes/no(default)]:
Supported Releases 10.2.0E or later
logging console
Disables, enables, or congures the minimum severity level for logging to the console.
Syntax
logging console {disable | enable | severity}
To set the severity to the default level, use the no logging console severity command. The default
severity level is log-notice.
Parameters severity — Set the minimum logging severity level:
• log-emerg — Set to unusable.
• log-alert — Set to immediate action is needed.
• log-crit — Set to critical conditions.
696 Troubleshoot OS10