Reference Guide

Parameters enable-all-plugin-options — (Optional) Generate a full support bundle with all plugin options enabled.
Defaults None
Command Mode EXEC
Usage Information To send the tar le to Dell Technical Support, use the dir supportbundle and copy supportbundle://
sosreport-OS10-file-number.tar.gz tftp://server-address/path commands.
Example
OS10# generate support-bundle
Example (Enable
Options)
OS10# generate support-bundle enable-all-plugin-options
Supported Releases 10.2.0E or later
System monitoring
Monitor OS10 using system alarm and log information.
System alarms
Alarms alert you to conditions that might prevent normal device operation:
• Critical — A critical condition exists and requires immediate action. A critical alarm may trigger if one or more hardware components
have failed, or one or more hardware components exceeds temperature thresholds.
• Major — A major error occurred and requires escalation or notication. For example, a major alarm may trigger if an interface failure
occurs, such as a port-channel being down.
• Minor — A minor error or non-critical condition occurred that, if left unchecked, might cause system service interruption or
performance degradation. A minor alarm requires monitoring or maintenance.
• Informational — An informational error occurred but does not impact performance. Monitor an informational alarm until the condition
changes.
Triggered alarms are in one of these states:
• Active — Alarms that are current and not cleared.
• Cleared — Alarms that are resolved and the device has returned to normal operation.
System logging
You can change system logging default settings using the severity level to control the type of system messages that are logged. Range of
logging severities:
• log-emerg — System is unstable.
• log-alert — Immediate action needed.
• log-crit — Critical conditions.
• log-err — Error conditions.
• log-warning — Warning conditions.
• log-notice — Normal but signicant conditions (default).
• log-info — Informational messages.
• log-debug — Debug messages.
• Enter the minimum severity level for logging to the console in CONFIGURATION mode.
logging console severity
Troubleshoot OS10
689