Deployment Guide
Table Of Contents
- 1 Introduction
- 2 Hardware overview
- 3 Topology overview
- 4 Preparation
- 5 S4148U-ON switch configuration
- 6 S4148U-ON validation
- 7 Configure Unity FC storage
- 8 Configure storage on ESXi hosts
- 9 Configure ESXi hosts for LAN traffic
- A Validated components
- B Technical support and resources
- C Support and feedback
42 Dell EMC Networking FCoE-to-Fibre Channel Deployment with S4148U-ON in F_port Mode | version 1.0
2 0% -
3 3 50% ETS
4 0% -
5 0% -
6 0% -
7 0% -
15 0% SP
Remote Parameters :
-------------------
Remote is enabled
PG-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,4,5,6,7 50% ETS
1 0% -
2 0% -
3 3 50% ETS
4 0% -
5 0% -
6 0% -
7 0% -
15 0% SP
Remote Willing Status is enabled
Local Parameters :
-------------------
Local is enabled
PG-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,4,5,6,7 50% ETS
1 0% -
2 0% -
3 3 50% ETS
4 0% -
5 0% -
6 0% -
7 0% -
15 0% SP
Oper status is init
ETS DCBX Oper status is Up
State Machine Type is Feature
Conf TLV Tx Status is enabled
Reco TLV Tx Status is disabled
14 Input Conf TLV Pkts, 16 Output Conf TLV Pkts, 0 Error Conf TLV Pkts