Deployment Guide
Table Of Contents
- 1 Introduction
- 2 Hardware overview
- 3 Topology overview
- 4 Preparation
- 5 S4148U-ON switch configuration
- 6 S4148U-ON validation
- 7 Configure Unity FC storage
- 8 Configure storage on ESXi hosts
- 9 Configure ESXi hosts for LAN traffic
- A Validated components
- B Technical support and resources
- C Support and feedback
40 Dell EMC Networking FCoE-to-Fibre Channel Deployment with S4148U-ON in F_port Mode | version 1.0
S4148U-Leaf1# show lldp dcbx interface ethernet 1/1/31
E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled
R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled
P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled
F-Application priority for FCOE enabled f-Application Priority for FCOE
disabled
I-Application priority for iSCSI enabled i-Application Priority for iSCSI
disabled
--------------------------------------------------------------------------------
Interface ethernet1/1/31
Port Role is Manual
DCBX Operational Status is Enabled
Is Configuration Source? FALSE
Local DCBX Compatibility mode is CEE
Local DCBX Configured mode is AUTO
Peer Operating version is CEE
Local DCBX TLVs Transmitted: ErPFi
Local DCBX Status
-----------------
DCBX Operational Version is 0
DCBX Max Version Supported is 0
Sequence Number: 1
Acknowledgment Number: 1
Protocol State: In-Sync
Peer DCBX Status
-----------------
DCBX Operational Version is 0
DCBX Max Version Supported is 0
Sequence Number: 1
Acknowledgment Number: 1
32 Input PFC TLV pkts, 40 Output PFC TLV pkts, 0 Error PFC pkts
32 Input PG TLV Pkts, 42 Output PG TLV Pkts, 0 Error PG TLV Pkts
32 Input Appln Priority TLV pkts, 33 Output Appln Priority TLV pkts, 0 Error
Appln Priority TLV Pkts
Total DCBX Frames transmitted 47
Total DCBX Frames received 32
Total DCBX Frame errors 0
Total DCBX Frames unrecognized 0