Deployment Guide

18 Dell EMC Networking FCoE-to-Fibre Channel Deployment with S4148U-ON in F_port Mode | version 1.0
4.4 Determine Unity 500F storage array FC WWPNs
The WWPNs of FC adapters in storage arrays are also used for FC zone configuration. WWPNs on Unity
storage arrays are determined as follows:
1. Connect to the Unisphere GUI in a web browser and log in. Click the Settings icon near the top
right corner of the page.
2. In the left pane of the Settings window, select Access > Fibre Channel.
The Fibre Channel Ports page is displayed as shown in Figure 14. A zoomed-in view of the area inside
the red box is shown in Figure 15.
Unisphere Fibre Channel Ports page
Zoomed-in view of SP A and SP B WWNs on Fibre Channel Ports page
3. Two WWNs are listed for each port. The World Wide Node Name (WWNN), outlined in black,
identifies this Unity storage array (the node). It is not used in zone configuration. The WWPNs,
outlined in blue, identify the individual ports and are used for FC zoning. Record the WWPNs as
shown in Table 2. The Switch column has been added based on the physical cable connections
shown in Figure 8.
Storage array FC adapter WWPNs
Service
processor
Port Switch WWPN
SP A
0
S4148U-Leaf1
50:06:01:66:47:E0:1B:19
SP A
1
S4148U-Leaf2
50:06:01:67:47:E0:1B:19
SP B
0
S4148U-Leaf1
50:06:01:6E:47:E0:1B:19
SP B
1
S4148U-Leaf2
50:06:01:6F:47:E0:1B:19