Deployment Guide

33 Dell EMC Networking OS10EE FCoE Deployment with FSB
8.6 show vfabric
The show vfabric command output provides various information including the default zone mode, the
active zone set, and interfaces that are members of the vfabric.
S4148U-F-Port-1# show vfabric
Fabric Name
Fabric Type FPORT
Fabric Id 101
Vlan Id 1001
FC-MAP 0xEFC64
Vlan priority 3
FCF Priority 128
FKA-Adv-Period Enabled,8
Config-State ACTIVE
Oper-State UP
==========================================
Switch Config Parameters
==========================================
Domain ID 100
==========================================
Switch Zoning Parameters
==========================================
Default Zone Mode: Deny
Active ZoneSet: zoneset1
==========================================
Members
fibrechannel1/1/1
fibrechannel1/1/3
ethernet1/1/41
==========================================