Reference Guide

Designated root priority: 4097, address: 90:b1:1c:f4:a6:02
Designated bridge priority: 4097, address: 90:b1:1c:f4:a6:02
Designated port ID: 0.1, designated path cost: 0
Number of transitions to forwarding state: 1
Edge port: No (default)
Link Type: Point-to-Point
BPDU Sent: 202, Received: 42
Port 1 (VFP(VirtualFabricPort)) of vlan100 is designated Forwarding
Port path cost 1, Port priority 0, Port Identifier 0.1
Designated root priority: 4196, address: 90:b1:1c:f4:a6:02
Designated bridge priority: 4196, address: 90:b1:1c:f4:a6:02
Designated port ID: 0.1, designated path cost: 0
Number of transitions to forwarding state: 1
Edge port: No (default)
Link Type: Point-to-Point
BPDU Sent: 101, Received: 21
Supported Releases 10.3.0E or later
show vlt
Displays information on a VLT domain.
Syntax
show vlt id
Parameter id — Enter a VLT domain ID, from 1 to 255.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show vlt 1
Domain ID : 1
Unit ID : 1
Role : primary
Version : 1.0
Local System MAC address : 90:b1:1c:f4:99:93
VLT MAC address : 90:b1:1c:f4:99:93
IP address : fda5:74c8:b79e:1::1
Delay-Restore timer : 1000 seconds
Peer-Routing : Disabled
Peer-Routing-Timeout timer : 0 seconds
VLTi Link Status
port-channel1000 : up
VLT Peer Unit ID System MAC Address Status IP Address Version
------------------------------------------------------------------------
2 90:b1:1c:f4:bc:0a up fda5:74c8:b79e:1::2 1.0
Supported Releases 10.2.0E or later
show vlt backup-link
Displays the details of heartbeat status.
Syntax
show vlt domain-id backup-link
Parameters domain-id — Enter the VLT domain ID.
Default Not congured
610 Virtual link trunking