Reference Guide
1 1 T2 temp sensor 31
1 2 system-NIC temp sensor 21
1 3 Ambient temp sensor 24
1 4 NPU temp sensor 43
Supported Releases 10.2.0E or later
show inventory
Displays system inventory information.
Syntax
show inventory
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show inventory
Product : S6000-ON
Description : S6000-ON 32x40GbE QSFP+ Interface Module
Software version : 10.2.9999E
Unit Type Part Number Rev Piece Part ID Svc Tag Exprs Svc Code
-------------------------------------------------------------------------------------------
* 1 S6000-ON 07VJDK A02 CN-07VJDK-28298-52R-0032 5XYK0Z1 129 373 368 13
1 S6000-ON-PWR-1-AC 0T9FNW A00 CN-0T9FNW-28298-52R-0263 AEIOU## 226 457 410 55
1 S6000-ON-FANTRAY-1 0MGDH8 A00 CN-0MGDH8-28298-52R-0394 AEIOU## 226 457 410 55
1 S6000-ON-FANTRAY-2 0MGDH8 A00 CN-0MGDH8-28298-52R-0394 AEIOU## 226 457 410 55
1 S6000-ON-FANTRAY-3 0MGDH8 A00 CN-0MGDH8-28298-52R-0392 AEIOU## 226 457 410 55
Supported Releases 10.2.0E or later
show ip management-route
Displays the IPv4 routes used to access the management port.
Syntax
show ip management-route [all | connected | summary | static]
Parameters
• all — (Optional) Display the IPv4 routes that the management interface uses.
• connected — (Optional) Display only routes directly connected to a management interface.
• summary — (Optional) Display the number of active and non-active management routes and their remote
destinations.
• static — (Optional) Display non-active management routes.
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the IPv4 static routes congured for the management port. Use the management
route command to congure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
60 Getting Started