Reference Guide

View class-map
OS10(config)# do show class-map
Class-map (qos): solar (match-any)
Policy-map conguration
Congure policy-maps to create a named object that represents a set of policies that apply to a set of trac classes. You can congure
three types of policy-maps—control-plane, qos (default), and queuing.
1 Create a policy-map, and congure a name for the policy-map in CONFIGURATION mode, up to 32 characters.
policy-map [type {qos | queuing | control-plane}] policy-map-name
• qos—Creates a QoS type policy-map.
• queuing—Creates a queuing type policy-map.
• control-plane—Creates a control-plane type policy-map.
2 Associate a policy-map with a class-map in POLICY-MAP mode.
class class-name
After creating policy-maps and associating the policy-maps with class-maps you can congure shaping, marking, metering, and other QoS
features - see Mark trac and Meter trac.
Create class-map C1
OS10(config)# class-map c1
OS10(conf-cmap-qos)# match cos 1
Show class-map
OS10(conf-cmap-qos)# do show class-map type qos c1
Class-map (qos): c1 (match-cos)
Create policy-map P1 for class C1
OS10(config)# policy-map p1
OS10(conf-pmap-qos)# class c1
OS10(conf-pmap-c-qos)# set qos-group 1
Show policy-map
OS10(conf-pmap-c-qos)# do show policy-map
Service-policy(qos) input: p1
Class-map (qos): c1
set qos-group 1
Interface policy-map
You can apply policy-maps directly to interfaces.
1 To attach a policy-map to in CONFIGURATION mode, enter interface mode.
interface ethernet node/slot/port:[subport]
2 Congure an input or output service-policy in INTERFACE mode.
service-policy {[input type {qos}] | [output type {queuing}]} policy-map-name
Attach policy-map
OS10(conf)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# service-policy input type qos p1
OS10(conf-if-eth1/1/1)# service-policy output type queuing p2
Quality of service
547