Reference Guide

Example
OS10(config)# snmp-server community public ro
Supported Releases 10.2.0E or later
snmp-server contact
Congures contact information for troubleshooting this SNMP node.
Syntax
snmp-server contact text
Parameters text — Enter an alphanumeric text string (up to 55 characters).
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes the SNMP server contact information.
Example
OS10(config)# snmp-server contact administrator
Supported Releases 10.2.0E or later
snmp-server host vrf
Congures a host to receive SNMP traps for the management VRF instance.
Syntax
snmp-server host {hostname | ipv4–address | ipv6–address} vrf management
Parameters hostname | ipv4–address | ipv6–address — Enter either the name or IPv4/IPv6 address of the host.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command disables the host from receiving the SNMP traps.
Example
OS10(config)# snmp-server host 1.1.1.1 vrf management
Supported Releases 10.4.0E(R1) or later
snmp-server location
Congures the location of the SNMP server.
Syntax
snmp-server location text
Parameters text — Enter an alphanumeric string (up to 55 characters).
Default United States
Command Mode CONFIGURATION
Usage Information The no version of this command removes the SNMP location.
Example
OS10(config)# snmp-server location datacenter10
Supported Releases 10.2.0E or later
468 System management