Reference Guide
Last clearing of "show interface" counters Queueing strategy: fifo Time since last interface
status change:
View interface conguration for specic VLAN
OS10# show interface vlan 320
Vlan 320 is up, line protocol is up
Address is , Current address is
Interface index is 69209184
Internet address is not set
MTU 1532 bytes
LineSpeed auto
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout: 240
Last clearing of "show interface" counters Queueing strategy: fifo Time since last interface
status change:
VLAN commands
description (VLAN)
Adds a description to the selected VLAN.
Syntax
description description
Parameters description — Enter a text string to identify the VLAN (up to 80 characters).
Default Not congured
Command Mode INTERFACE-VLAN
Usage Information None
Example
OS10(conf-if-vlan)# description vlan3
Supported Releases 10.2.0E or later
interface vlan
Creates a VLAN interface.
Syntax
interface vlan vlan-id
Parameters vlan-id — Enter the VLAN ID number (1 to 4094).
Default VLAN 1
Command Mode CONFIGURATION
Usage Information FTP, TFTP, MAC ACLs, and SNMP operations are not supported — IP ACLs are supported on VLANs only. The no
version of this command deletes the interface.
Example
OS10(config)# interface vlan 10
OS10(conf-if-vl-10)#
Supported Releases 10.2.0E or later
Layer 2 239