Reference Guide
Usage Information
The no version of this command disables the F_Port. You can disable the F_Port only when vfabric and zoning
congurations are not available. Before disabling the F_Port, remove the vfabric and zoning congurations.
Example
OS10(config)# feature fc domain-id 100
Supported Releases 10.3.1E or later
feature fc npg
Enables the NPG mode globally.
Syntax
feature fc npg
Parameters None
Defaults Disabled
Command Mode CONFIGURATION
Usage Information
The no version of this command disables the NPG mode. You can enable only any one of the following at a time:
F_Port, FCoE, or NPG.
Example
OS10(config)# feature fc npg
Supported Releases 10.4.0E(R1) or later
member (alias)
Add members to existing FC aliases. Identify a member by an FC alias, a World Wide Name (WWN), or an FC ID.
Syntax
member {wwn wwn-ID | fc-id fc-id}
Parameters
• wwn-ID — Enter the WWN name.
• fc-id — Enter the FC ID name.
Defaults Not congured
Command Mode Alias CONFIGURATION
Usage Information
The no version of this command removes the member from the FC alias.
Example
OS10(config)# fc alias test
OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9
OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57
Supported Releases 10.3.1E or later
124 Fibre channel